WARNING - OUTDATED CONTENT!
Currently Shiro has fine Jakarta Faces integration.
Introduction
After having used Java EE container managed authentication and even having homegrown JSF based authentication for a good amount of years and getting a bit tired of it, I wanted to review how well the current 3rd party Java EE authentication frameworks integrate in Java EE 6 with JSF 2, CDI and EJB 3. Apache Shiro (formerly known as JSecurity) is one of them. I also briefly looked at Spring Security, but it's not usable in JSF/CDI/EJB beans, but only in Spring beans. You'd almost be forced to migrate from Java EE to Spring altogether which just doesn't make sense anymore these non-J2EE days.
Back to top
What container managed authentication can (not)
First we need to understand how container managed authentication is insufficient for a bit more than just a public website with an "admin backend".
- No builtin "Remember Me" functionality. Servlet 3.0 made this however easy to homegrow.
- No straightforward way to redisplay login page with login errors in case you've specified the same page as both login page and error page. There are however tricks.
- No remembering of POST request data when a form is submitted while the session is expired. There is no way to retain this data for resubmission other than homebrewing an authentication filter or going for a 3rd party one.
- No permission based restriction. A "permission" basically checks a specific task/action depending on currently logged-in user which may be shared across multiple roles. Role based restriction is sometimes too rough, requiring you to create ridiculous meta-roles like "SUPER_USER", "POWER_USER", "SUPER_ADMIN", "ALMOST_ADMIN", "GOD" and so on.
- No container-independent way of configuring the datasource containing users/roles. Not all containers offer the same granularity of configuring the datasource, making the datasource or even the datamodel potentially unportable across containers. JASPIC is intented to solve that, but it has as of now still container-specific problems.
Noted should be that the "Remember Me" functionality has become a breeze since the new Servlet 3.0 (Java EE 6) programmatic login facility in flavor of HttpServletRequest#login(). Before that, it was not possible without hacking around with container specific classes or fiddling with JASPIC. Also noted should be that since Java EE 5 the container managed security also offers annotation based restriction like @RolesAllowed in EJB methods which is very useful.
As to JSF, you can get the login username of the currently logged-in user in the view by #{request.remoteUser}. You can perform role based checks by #{request.isUserInRole('SOME')} in e.g. the rendered attribute of a JSF component. In the backing bean, the same methods are also available via ExternalContext. However, usually it are the EJBs who do the business actions and should thus do the security checks. But they are not allowed to grab the FacesContext, let alone the ExternalContext. For the role checks, the aforementioned annotations should be used instead.
Well, let's look if Shiro can do it better/easier.
Back to top
Preparing
The below article/tutorial assumes in Eclipse terms that you've created a "Dynamic Web Project" with JSF, CDI and JPA facets and that you've configured a Java EE 6 web profile compatible container like Glassfish or JBoss AS as target container. It also assumes that you know how to create a Hello World JSF application. So you know where/how to put the necessary Facelets code (I don't like repeating all the <html>, <h:body>, etc boilerplate in all Facelets examples).
Back to top
Getting Shiro to work
We need to have at least the shiro-core and shiro-web JARs in our webapp's /WEB-INF/lib. Then, the documentation for configuring Shiro on web applications is available here. Okay, we thus need a servlet context listener so that Shiro can do its global initialization thing and a servlet filter for the actual authentication/authorization works whereby Shiro also wraps the request/response by Shiro-controlled ones (so that e.g. #{request.remoteUser} and so on still keep its functionality). Add them to the webapp's /WEB-INF/web.xml as follows:
<listener>
<listener-class>org.apache.shiro.web.env.EnvironmentLoaderListener</listener-class>
</listener>
<filter>
<filter-name>shiroFilter</filter-name>
<filter-class>org.apache.shiro.web.servlet.ShiroFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>shiroFilter</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
<dispatcher>INCLUDE</dispatcher>
<dispatcher>ERROR</dispatcher>
</filter-mapping>
Noted should be that FORWARD and INCLUDE dispatchers are never internally used by JSF on Facelets. They are in any way kept there in web.xml for the sake of completeness (perhaps you want to ever use JSP in the same webapp? you never know). If you intend to navigate to a JSF resource which possibly requires re-checking authentication, then you'd better make it a fullworthy GET request by either a plain GET link/button or a POST-Redirect-GET action. See also when should I use <h:outputLink> instead of <h:commandLink>?
As to configuring Shiro, it uses the INI file syntax. There are several default filters available. If you need BASIC authentication, use the authcBasic filter. If you need FORM authentication, use authc filter.
Let's start with the simplest possible configuration, a BASIC authentication on everything inside the /app/ subfolder of the webapp and a single admin user. First create a /WEB-INF/shiro.ini file with the following contents (yes, the example username is "admin" and the example password is just like that, "password"):
[users]
admin = password
[urls]
/app/** = authcBasicLet's test it ... Hey, that worked quite good!
Back to top
Form based authentication
Turning it into form based authentication is just a matter of changing authBasic to authc (again, see the list of default filters for the filter name). Only, the login page path defaults to /login.jsp. As JSP is a deprecated view technology since JSF 2.0 at December 2009, we obviously don't want to keep this setting as such. We want to change it to Facelets as /login.xhtml. This can be done by setting the authc.loginUrl entry. Note that you also need to include it in the [urls] list. Also note that I of course assume that you've mapped the FacesServlet on an URL pattern of *.xhtml. If you're using a different URL pattern, then you should also change it as such in the INI file.
[main]
authc.loginUrl = /login.xhtml
[users]
admin = password
[urls]
/login.xhtml = authc
/app/** = authcThe shiro.ini file syntax follows Javabean/EL look-a-like configuration of properties. If you look closer at the javadoc of FormAuthenticationFilter, then you'll see that loginUrl is actually a property of FormAuthenticationFilter! The shiro.ini basically interprets the entry key as a setter operation and uses the entry value as the set value. This configuration style however requires Apache Commons BeanUtils in the webapp. So, drop its JAR in /WEB-INF/lib as well.
The HTML form syntax of /login.xhtml as shown below is also rather straightforward. Remember, you can without problems use "plain HTML" in a JSF/Facelets page. Note that Shiro sets the login failure error message as a request attribute with the default name shiroLoginFailure. This was nowhere mentioned in the Shiro web documentation! I figured it by looking at the Javadoc of FormAuthenticationFilter.
<h2>Login</h2>
<form method="post">
<label for="username">Username:</label>
<input type="text" id="username" name="username" />
<br/>
<label for="password">Password:</label>
<input type="password" id="password" name="password" />
<br/>
<label for="rememberMe">Remember me:</label>
<input type="checkbox" id="rememberMe" name="rememberMe" value="true" />
<br/>
<input type="submit" value="Login" />
<span class="error">#{shiroLoginFailure}</span>
</form>
Let's test it ... Yes, that works also quite good.
Noted should be that the failure message just represents the fully qualified classname of the thrown exception. E.g. org.apache.shiro.authc.UnknownAccountException. This is intented to be further used as key of some i18n resource bundle like so #{bundle[shiroLoginFailure]} or perhaps a Map property.
Back to top
Remember Me
The form based authentication example as shown in the previous chapter has also a "Remember Me" checkbox. It indeed sets a rememberMe cookie on the response with some long and encrypted value. However, after I deleted the JSESSIONID cookie in the browser, it still brought me back to the login page as if the "Remember Me" was never ticked.
A little research with help of Google brought me to Matt Raible's blog from May 2011 (almost 2 years ago) wherein he initially also complained that the Shiro Remember Me didn't work. It turns out that you've to use the UserFilter instead of the FormAuthenticationFilter! As per the default filters listing, it has the name user. So, fix the shiro.ini accordingly.
[main]
authc.loginUrl = /login.xhtml
user.loginUrl = /login.xhtml
[users]
admin = password
[urls]
/login.xhtml = authc
/app/** = userFinally, it works.
In hindsight, this approach of Shiro makes sense. You would at times of course also like to distinguish "remembered" users from really authenticated users, so that you can if necessary re-ask authentication on really sensitive submits. I am however surprised that this was nowhere mentioned in the Remember Me section of the Shiro web documentation, let alone in the rest of the Shiro web documentation, even though I initially expected that this was a classic RTFM case. I wonder, have the Shiro guys ever reviewed the documentation on that point after the complaint of Matt Raible?
Note that I had to duplicate authc.loginUrl and user.loginUrl to prevent authentication failures on authc from being still redirected to the default login URL /index.jsp. It would make more sense if the UserFilter basically extends from FormAuthenticationFilter so that both cases are covered. Maybe Shiro has its own reasons for this separation of the both filters, but I don't see it for now.
By the way, the cookie value turns out to be a Base64 encoded representation of an AES encrypted representation of a serialized representation of a collection of principals. Basically, it contains the necessary username information which is decryptable with the right key (which a hacker can in case of a default key easily figure by just looking at Shiro's source code). Not my favorite approach, but the AES encryption is really strong and you can (must) specify a custom AES cipher key or even a complete custom manager which can deal with the cookie value format you need. The custom AES chiper key can if necessary be specified as follows in shiro.ini according to this example in the Shiro INI documentation:
securityManager.rememberMeManager.cipherKey = 0x3707344A4093822299F31D008
The value is obviously fully to your choice. You can generate your own as follows using Shiro's own cryptographic API:
String key = Hex.encodeToString(new AesCipherService().generateNewKey().getEncoded());
System.out.println("0x" + key);
Back to top
Behavior on session expiration
The behavior on session expiration is rather straightforward on GET requests. When not remembered, it shows the login page and on successful login, it redirects you to the initially requested page, complete with the original query string. Exactly as expected.
The behavior is however not consistent on POST requests. I've observed the behavior on session expiration in 4 different cases:
- Synchronous POST without Remember Me
This discarded all the POST data and the user was after the login redirected to the application root instead of the initial page. You'd have to navigate to the initial page and re-enter all the POST data yourself. As to the wrong redirect to the root, this turns out to be the default fallback URL for the case there's no saved request. However, there's definitely a saved request, so I peeked around in the source code and it turns out that the saved request is only valid on a GET request and thus for POST the fallback URL is instead been used.
Well, this makes perhaps sense in some cases, but this should really have been better documented. In case of JSF, it doesn't harm if you use the POST URL for a GET request as JSF by default submits the
<h:form>to exactly the same URL as the page is been requested with by GET (also known as "postback"). A concrete solution to the problem of being redirected to the wrong URL is discussed later in chapter Programmatic login.Further, it would have been be nice if Shiro remembered the POST request request body as well and upon a successful login via POST, replace the current request body with it and perform a 307 redirect. Or, perhaps, at least offer a way to obtain the saved POST request parameters by programmatic means, so that the developer can choose for setting the initial POST request URL as login form URL and all POST request parameters as hidden input fields of the login form. When the login is successful, then Shiro should not perform a redirect, but just let the request continue to the application. Theoretically, this is possible with a custom Shiro filter.
- Synchronous POST with Remember Me
On a default JSF setup, this failed with a
ViewExpiredException. This is not Shiro's fault. The actual login was successfully performed. However, as the session is expired, the JSF view state is also expired. You can solve this by either setting thejavax.faces.STATE_SAVING_METHODtoclient, or by using OmniFaces<o:enableRestorableView>. Once fixed that, the login went smoothly. All the POST data was successfully submitted. Of course, the login happens within the very same request already and effectively no redirect has taken place. - Asynchronous POST without Remember Me
This failed without any feedback. Shiro forced a synchronous redirect to the login URL which resulted in an ajax response which is effectively empty, leaving the enduser with no form of feedback. The enduser is facing the same page as if the form submit did nothing. In JSF ajax, redirects are not instructed by a HTTP 302 response, but by a special XML response. See also among others this stackoverflow.com answer.
It'd be nice if Shiro performed a
if ("partial/ajax".equals(request.getHeader("Faces-Request")))check and returned the appropriate XML response. Fortunately, it's possible to extend Shiro's authentication filter to take this into account. A concrete solution is discussed later in chapter Make Shiro JSF ajax aware. - Asynchronous POST with Remember Me
This behaved exactly the same as the synchronous one described at point 2. The principle is also not much different though. You're however dependent on having a decent ajax exception handler if you would get feedback about the
ViewExpiredExceptionor not.
Back to top
Using a JSF form
Instead of a plain HTML form, you can of course also use a JSF form so that you can benefit of JSF builtin required="true" validation and/or to get look'n'feel in line with the rest of the site (e.g. by PrimeFaces). You, as a JSF developer, should probably already know for long that JSF prepends the ID of the parent form in the ID (and also name) attribute of the input components. However, Shiro checks by default the request parameters with the exact name username, password and rememberMe only. Fortunately, this is configurable in shiro.ini. Look in the javadoc of FormAuthenticationFilter, there are setters for the properties usernameParam, passwordParam and rememberMeParam.
So, given the following JSF form in /login.xhtml,
<h2>Login</h2>
<h:form id="login">
<h:panelGrid columns="3">
<h:outputLabel for="username" value="Username:" />
<h:inputText id="username" required="true" />
<h:message for="username" />
<h:outputLabel for="password" value="Password" />
<h:inputSecret id="password" required="true" />
<h:message for="password" />
<h:outputLabel for="rememberMe" value="Remember Me" />
<h:selectBooleanCheckbox id="rememberMe" />
<h:panelGroup />
<h:panelGroup />
<h:commandButton value="Login" />
<h:panelGroup styleClass="error" rendered="#{not facesContext.validationFailed}">
#{shiroLoginFailure}
</h:panelGroup>
</h:panelGrid>
</h:form>
and the following shiro.ini,
[main]
authc.loginUrl = /login.xhtml
authc.usernameParam = login:username
authc.passwordParam = login:password
authc.rememberMeParam = login:rememberMe
user.loginUrl = /login.xhtml
[users]
admin = password
[urls]
/login.xhtml = authc
/app/** = user
you're already set. It works fine. Note that there's no means of a backing bean. That's also not necessary given that Shiro is performing the business logic by itself based on the request parameters.
Note that it's not possible to login by ajax this way. The submit itself would work fine and you would be logged in, but the navigation does not work. You won't be navigated to the initially requested page at all. So, if you're using JSF component libraries with builtin ajax facilities like PrimeFaces, then you'd need to set ajax="false" on the command button. Also, input validation should not be done via ajax. It will work, but those requests will trigger Shiro's "remember the last accessed restricted page" mechanism and cause Shiro to redirect to the wrong URL after successful login, namely the one on which the ajax validation request is fired.
If you really need to login or validate via ajax, then you can always consider programmatic login.
Back to top
Programmatic login
Shiro also offers a programmatic login possibility. This is more useful if you want to be able to utilize for example ajax based validation on the required input fields and/or want to be able to perform the login by ajax. The programmatic login API is rather simple, as documented in Shiro web documentation:
SecurityUtils.getSubject().login(new UsernamePasswordToken(username, password, remember));
However, the documentation doesn't seem to explain in any way how to obtain the saved request URL in order to perform a redirect to that URL. Some Googling brought me at this Shiro mailing list discussion which shows that the actual redirect can be done as follows:
WebUtils.redirectToSavedRequest(request, response, fallbackURL);
This would however not work when the current request concerns a JSF ajax request. As explained before, it has to return a special XML response instructing the JSF ajax engine to perform a redirect by itself. This functionality is provided by JSF's own ExternalContext#redirect() method which transparently distinghuishes ajax from non-ajax requests. So, we really need to have just the saved request URL so that we could perform the redirect ourselves. After peeking around in the Shiro source code how it deals with the saved request URL, I figured that the saved request URL is available as follows:
String savedRequestURL = WebUtils.getAndClearSavedRequest(request).getRequestUrl();
Okay, let's put the pieces together. First create a backing bean (for practical reasons we're using CDI managed bean annotations instead of JSF managed bean annotations, further in the article annotation based restriction will be discussed and that works only in managed beans when using CDI; feel however free to use JSF managed bean annotations instead for programmatic login):
package com.example.controller;
import java.io.IOException;
import javax.enterprise.context.RequestScoped;
import javax.inject.Named;
import org.apache.shiro.SecurityUtils;
import org.apache.shiro.authc.AuthenticationException;
import org.apache.shiro.authc.UsernamePasswordToken;
import org.apache.shiro.web.util.SavedRequest;
import org.apache.shiro.web.util.WebUtils;
import org.omnifaces.util.Faces;
import org.omnifaces.util.Messages;
@Named
@RequestScoped
public class Login {
public static final String HOME_URL = "app/index.xhtml";
private String username;
private String password;
private boolean remember;
public void submit() throws IOException {
try {
SecurityUtils.getSubject().login(new UsernamePasswordToken(username, password, remember));
SavedRequest savedRequest = WebUtils.getAndClearSavedRequest(Faces.getRequest());
Faces.redirect(savedRequest != null ? savedRequest.getRequestUrl() : HOME_URL);
}
catch (AuthenticationException e) {
Messages.addGlobalError("Unknown user, please try again");
e.printStackTrace(); // TODO: logger.
}
}
// Add/generate getters+setters.
}Note that, as you're reading this blog, I'll for simplicity also assume that you're familiar with OmniFaces which minimizes some FacesContext boilerplate. The Faces and Messages utility classes are from OmniFaces.
Now change the login form in /login.xhtml accordingly to submit to that and perform the necessary ajax magic:
<h2>Login</h2>
<h:form id="login">
<h:panelGrid columns="3">
<h:outputLabel for="username" value="Username:" />
<h:inputText id="username" value="#{login.username}" required="true">
<f:ajax event="blur" render="m_username" />
</h:inputText>
<h:message id="m_username" for="username" />
<h:outputLabel for="password" value="Password:" />
<h:inputSecret id="password" value="#{login.password}" required="true">
<f:ajax event="blur" render="m_password" />
</h:inputSecret>
<h:message id="m_password" for="password" />
<h:outputLabel for="rememberMe" value="Remember Me:" />
<h:selectBooleanCheckbox id="rememberMe" value="#{login.remember}" />
<h:panelGroup />
<h:panelGroup />
<h:commandButton value="Login" action="#{login.submit}" >
<f:ajax execute="@form" render="@form" />
</h:commandButton>
<h:messages globalOnly="true" layout="table" />
</h:panelGrid>
</h:form>
Now edit the shiro.ini accordingly to get rid of authc filter:
[main]
user.loginUrl = /login.xhtml
[users]
admin = password
[urls]
/login.xhtml = user
/app/** = userLet's test it ... Yes, it works again quite good. Additional bonus is that this approach also fixes the problem that Shiro by default redirects to a fallback URL when the saved request concerns a POST request. See also point 1 of chapter Behavior on session expiration.
Noted should be that when the page with the POST form is been requested by GET with a request parameter like so /customers/edit.xhtml?id=42 in order to set the Customer via <f:viewParam> and so on, then you would after successful login be redirected to /customers/edit.xhtml. This is not exactly Shiro's fault, it's JSF itself who is by default submitting to an URL without the query string in the <h:form>. If you have those parameters definied as <f:viewParam>, then you can just replace the form by the OmniFaces <o:form> as follows to include the view parameters in the form action URL:
<o:form includeViewParams="true">
...
</o:form>
This way JSF will submit to the URL with the view parameters in the query string and thus give you the opportunity to redirect to exactly that URL after successful login. See also this stackoverflow.com question and answer.
Back to top
Programmatic logout
The programmic logout API is also simple, but it is nowhere mentioned in the Shiro web documentation. It was however easily found with common sense and IDE autocomplete on the Subject instance. So, here is the oneliner:
SecurityUtils.getSubject().logout();
You can also just invalidate the HTTP session, however that doesn't trash the "Remember Me" cookie in case you're using it and the user would be auto-logged in again on the subsequent request when "Remember Me" was ticked. So, invalidating the session should merely be done to cleanup any other user-related state in the session, not to perform the actual logout.
Here's how the logout backing bean could look like:
package com.example.controller;
import java.io.IOException;
import javax.enterprise.context.RequestScoped;
import javax.inject.Named;
import org.apache.shiro.SecurityUtils;
import org.omnifaces.util.Faces;
@Named
@RequestScoped
public class Logout {
public static final String HOME_URL = "login.xhtml";
public void submit() throws IOException {
SecurityUtils.getSubject().logout();
Faces.invalidateSession();
Faces.redirect(HOME_URL);
}
}Note that the redirect is really mandatory as the invalidated session is still available in the response of the current request. It's only not available anymore in the subsequent request. Also note that this issue is not specific to Shiro/JSF, just to HTTP in general.
In the view, just provide a command link/button which invokes #{logout.submit}.
<h:form>
<h:commandButton value="logout" action="#{logout.submit}" />
</h:form>
Back to top
Make Shiro JSF ajax aware
As per point 3 of chapter Behavior on session expiration, the redirect to login page in case of session expiration wasn't properly dealt with in case of JSF ajax requests. The enduser basically ends up with no single form of feedback.
Fortunately, the Shiro API is designed in such way that this is fairly easy overridable with the following filter:
package com.example.filter;
import java.io.IOException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.http.HttpServletRequest;
import org.apache.shiro.web.filter.authc.UserFilter;
public class FacesAjaxAwareUserFilter extends UserFilter {
private static final String FACES_REDIRECT_XML = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>"
+ "<partial-response><redirect url=\"%s\"></redirect></partial-response>";
@Override
protected void redirectToLogin(ServletRequest req, ServletResponse res) throws IOException {
HttpServletRequest request = (HttpServletRequest) req;
if ("partial/ajax".equals(request.getHeader("Faces-Request"))) {
res.setContentType("text/xml");
res.setCharacterEncoding("UTF-8");
res.getWriter().printf(FACES_REDIRECT_XML, request.getContextPath() + getLoginUrl());
}
else {
super.redirectToLogin(req, res);
}
}
}To get it to run, just set it as user filter in shiro.ini (no, do not use the @WebFilter annotation nor the web.xml!):
[main]
user = com.example.filter.FacesAjaxAwareUserFilter
user.loginUrl = /login.xhtml
[users]
admin = password
[urls]
/login.xhtml = user
/app/** = userLet's test it ... Yes, session expiration on ajax requests is now also properly handled.
Back to top
Configuring JDBC realm
In a bit sane Java EE web application wherein the container managed authentication is insufficient, the users are more than often not stored in some text file, but instead in a SQL database, along with their roles. In Shiro, you can use a Realm to configure it to obtain the users and roles (and permissions) from a SQL database. One of ready-to-use realms is the JdbcRealm which is relatively easy to setup via shiro.ini. Note also that this way the Realm is fully portable across different containers, which is definitely a big plus.
In this article we'll setup a test database with help of the embedded database engine H2 (formerly known as Hypersonic) and create a JPA model and an EJB service. Noted should be that the H2/JPA/EJB part is not necessary for functioning of Shiro. You're free in the choice of database vendor and the way how you model it and how you interact with it. In any way, the JPA/EJB examples are concretely used in the Register user and Hashing the password cases later on.
For your information only (you don't need to create them yourself at this point), the (Hibernate-generated) DDLs of the tables look basically like this:
create table User (
id bigint generated by default as identity (start with 1),
password varchar(255) not null,
username varchar(255) not null,
primary key (id),
unique (username)
)
create table UserRoles (
userId bigint not null,
role varchar(255)
)Noted should be that the role column could better have been an enumerated type (enum, set, etc) depending on DB make/version. This is however beyond the scope of this article. Let's try to keep it simple for now.
First download the H2 JAR file (no, not the Windows installer nor the zip file, just the JAR file from Maven or Sourceforge!) and drop it in /WEB-INF/lib folder. Then edit shiro.ini accordingly to get rid of the [users] entry and utilize the users database via a JdbcRealm:
[main]
# Create and setup user filter.
user = com.example.filter.FacesAjaxAwareUserFilter
user.loginUrl = /login.xhtml
# Create JDBC realm.
jdbcRealm = org.apache.shiro.realm.jdbc.JdbcRealm
# Configure JDBC realm datasource.
dataSource = org.h2.jdbcx.JdbcDataSource
dataSource.URL = jdbc:h2:~/test
dataSource.user = sa
dataSource.password = sa
jdbcRealm.dataSource = $dataSource
# Configure JDBC realm SQL queries.
jdbcRealm.authenticationQuery = SELECT password FROM User WHERE username = ?
jdbcRealm.userRolesQuery = SELECT role FROM UserRoles WHERE userId = (SELECT id FROM User WHERE username = ?)
[urls]
/login.xhtml = user
/app/** = userNote that the Javabean/EL-style properties of the data source in shiro.ini should actually match the properties of the real data source instance.
At this point, it isn't possible to test the login thing as the database is basically empty :) Continue to the next chapters to create the model and the service, so that we can create users.
Back to top
JPA model and EJB service
Now the model and service. First create the following user role enum, com.example.model.Role:
package com.example.model;
public enum Role {
EMPLOYEE, MANAGER, ADMIN;
}Then create the following user entity, com.example.model.User:
package com.example.model;
import java.util.List;
import javax.persistence.CollectionTable;
import javax.persistence.Column;
import javax.persistence.ElementCollection;
import javax.persistence.Entity;
import javax.persistence.EnumType;
import javax.persistence.Enumerated;
import javax.persistence.FetchType;
import javax.persistence.GeneratedValue;
import javax.persistence.GenerationType;
import javax.persistence.Id;
import javax.persistence.JoinColumn;
import javax.validation.constraints.NotNull;
@Entity
@NamedQueries({
@NamedQuery(
name = "User.find",
query = "SELECT u FROM User u WHERE u.username = :username AND u.password = :password"),
@NamedQuery(
name = "User.list",
query = "SELECT u FROM User u")
})
public class User {
@Id
@GeneratedValue(strategy = GenerationType.IDENTITY)
private Long id;
@NotNull
@Column(unique = true)
private String username;
@NotNull
private String password;
@ElementCollection(targetClass = Role.class, fetch = FetchType.EAGER)
@Enumerated(EnumType.STRING)
@CollectionTable(name = "UserRoles", joinColumns = { @JoinColumn(name = "userId") })
@Column(name = "role")
private List<Role> roles;
// Add/generate getters+setters and hashCode+equals.
}Then create the following service class, com.example.service.UserService:
package com.example.service;
import java.util.List;
import javax.ejb.Stateless;
import javax.enterprise.context.RequestScoped;
import javax.enterprise.inject.Produces;
import javax.inject.Named;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
import org.omnifaces.cdi.ViewScoped;
import com.example.model.User;
@Stateless
public class UserService {
@PersistenceContext
private EntityManager em;
public User find(Long id) {
return em.find(User.class, id);
}
public User find(String username, String password) {
List<User> found = em.createNamedQuery("User.find", User.class)
.setParameter("username", username)
.setParameter("password", password)
.getResultList();
return found.isEmpty() ? null : found.get(0);
}
@Produces
@Named("users")
@RequestScoped
public List<User> list() {
return em.createNamedQuery("User.list", User.class).getResultList();
}
public Long create(User user) {
em.persist(user);
return user.getId();
}
public void update(User user) {
em.merge(user);
}
public void delete(User user) {
em.remove(em.contains(user) ? user : em.merge(user));
}
}Then create the following datasource in /WEB-INF/web.xml:
<data-source>
<name>java:app/H2/test</name>
<class-name>org.h2.jdbcx.JdbcDataSource</class-name>
<url>jdbc:h2:~/test</url>
<user>sa</user>
<password>sa</password>
<transactional>false</transactional> <!-- https://community.jboss.org/message/730085 -->
<max-pool-size>10</max-pool-size>
<min-pool-size>5</min-pool-size>
<max-statements>0</max-statements>
</data-source>
Finally create the following persistence unit in /META-INF/persistence.xml (please note that this configuration indeed drops the DB tables on every server restart, again, it's just for testing purposes):
<persistence-unit name="test-jsf-shiro">
<jta-data-source>java:app/H2/test</jta-data-source>
<class>com.example.model.User</class>
<properties>
<!-- Hibernate specific properties. -->
<property name="hibernate.dialect" value="org.hibernate.dialect.HSQLDialect" />
<property name="hibernate.hbm2ddl.auto" value="create-drop" />
<property name="hibernate.show_sql" value="true" />
<!-- EclipseLink specific properties. -->
<property name="eclipselink.ddl-generation" value="create-tables" />
<property name="eclipselink.ddl-generation.output-mode" value="database" />
</properties>
</persistence-unit>
Again, noted should be that all of the above boilerplate is not mandatory for the functioning of Shiro. It's merely to create and find users as demonstrated in the following chapter.
Back to top
Register user
In order to create users via JSF, we need the following backing bean:
package com.example.controller;
import javax.annotation.PostConstruct;
import javax.ejb.EJB;
import javax.enterprise.context.RequestScoped;
import javax.inject.Named;
import org.omnifaces.util.Messages;
import com.example.model.User;
import com.example.service.UserService;
@Named
@RequestScoped
public class Register {
private User user;
@EJB
private UserService service;
@PostConstruct
public void init() {
user = new User();
}
public void submit() {
try {
service.create(user);
Messages.addGlobalInfo("Registration suceed, new user ID is: {0}", user.getId());
}
catch (RuntimeException e) {
Messages.addGlobalError("Registration failed: {0}", e.getMessage());
e.printStackTrace(); // TODO: logger.
}
}
public User getUser() {
return user;
}
}And this view, /register.xhtml, using among others OmniFaces <o:importConstants> to ease importing enums into <f:selectItems> and OmniFaces omnifaces.GenericEnumConverter in order to convert the selected roles to a proper List<Role> instead of a List<String>:
<o:importConstants type="com.example.model.Role" />
<h2>Register</h2>
<h:form id="register">
<h:panelGrid columns="3">
<h:outputLabel for="username" value="Username:" />
<h:inputText id="username" value="#{register.user.username}" required="true">
<f:ajax event="blur" render="m_username" />
</h:inputText>
<h:message id="m_username" for="username" />
<h:outputLabel for="password" value="Password:" />
<h:inputSecret id="password" value="#{register.user.password}" required="true">
<f:ajax event="blur" render="m_password" />
</h:inputSecret>
<h:message id="m_password" for="password" />
<h:outputLabel for="roles" value="Roles:" />
<h:selectManyCheckbox id="roles" value="#{register.user.roles}" required="true"
layout="pageDirection" converter="omnifaces.GenericEnumConverter">
<f:selectItems value="#{Role}" />
</h:selectManyCheckbox>
<h:message id="m_roles" for="roles" />
<h:panelGroup />
<h:commandButton value="Register" action="#{register.submit}" >
<f:ajax execute="@form" render="@form" />
</h:commandButton>
<h:messages globalOnly="true" layout="table" />
</h:panelGrid>
</h:form>
Finally, at this point we should be able to create users via database and login them programmatically via a JDBC realm!
If you want to have an overview of all users, just start off with this table (note that this effectively retrieves the list via @Produces annotation of UserService#list()):
<h2>Users</h2>
<h:dataTable value="#{users}" var="user">
<h:column>#{user.id}</h:column>
<h:column>#{user.username}</h:column>
<h:column>#{user.password}</h:column>
<h:column>#{user.roles}</h:column>
</h:dataTable>
Don't forget to ajax-update it on register, if necessary.
Back to top
Hashing the password
Storing password plaintext in the DB is not exactly secure. We'd of course like to hash them, if necessary along with a salt. Shiro offers several helper classes for hashing which allows you to do the job with a minimum of effort. Let's pick the most strongest hash algorithm: SHA256.
First edit Register#submit() method accordingly to hash like that (note: don't use redisplay="true" in the JSF password field! otherwise the hashed value would be reflected in the UI):
user.setPassword(new Sha256Hash(user.getPassword()).toHex());
service.create(user);
// ...
Then tell Shiro's JDBC realm to hash like that as well. Add the following lines to the end of the [main] section of shiro.ini:
# Configure JDBC realm password hashing.
credentialsMatcher = org.apache.shiro.authc.credential.HashedCredentialsMatcher
credentialsMatcher.hashAlgorithmName = SHA-256
jdbcRealm.credentialsMatcher = $credentialsMatcher
That's it!
Noted should be that the HashedCredentialsMatcher javadoc strongly recommends salting passwords. Here's a cite of relevance:
ALWAYS, ALWAYS, ALWAYS SALT USER PASSWORDS!
That makes completely sense. However, configuring a salted password hash on a JDBC realm is in the current Shiro 1.2.1 version surprisingly not as easy as configuring the password hash. You basically need to homebrew a custom salt aware realm as described in this blog. In other words, in spite of their own strong recommendation, Shiro does not offer any ready-to-use realms for this. They seem to be working on that for version 1.3.
In any case, we're now at the point that all the essential stuff is properly configured and working smoothly: register, login, remember me, logout, users database and password hashing. Now, let's go a step further with user and role based restriction in Facelets rendering, HTTP requests and even bean methods.
Back to top
Restriction in Facelets rendering
With Shiro you can just continue using #{request.remoteUser} and #{request.isUserInRole('SOME')} the usual way as if you were using container managed authentication.
<h:panelGroup rendered="#{empty request.remoteUser}">
Welcome! Well, it seems that you are not logged in!
Please <h:link value="login" outcome="login" /> to see more awesomeness on this site!
</h:panelGroup>
<h:panelGroup rendered="#{not empty request.remoteUser}">
Welcome! You're logged in as #{request.remoteUser}. Enjoy the site!
<h:panelGroup rendered="#{request.isUserInRole('ADMIN')}">
You're an ADMIN user! Wow, we'll render some more cool buttons for you soon.
</h:panelGroup>
<h:panelGroup rendered="#{not request.isUserInRole('ADMIN')}">
You're not an ADMIN user. You probably will never become one.
</h:panelGroup>
</h:panelGroup>
This is absolutely a big plus. Not only makes this the views fully portable across container managed authentication and Shiro, but there are no other usable Shiro-offered ways, even no Facelets tags!
Shiro has a JSP/GSP based tag library, but JSP tags are unfortunately unusable in Facelets. It surprises me somewhat that they don't have a Facelets tag library even though it was born in the end of 2006 and has become the default view technology since Java EE 6 in the end of 2009. Even more, JSP is since then officially deprecated as the default view technology of JSF. If you're using the old Facelets 1.x (for JSF 1.x, which is over 6 years old already), then you can go for this Shiro Facelets taglib which was created by a power user of Shiro. Unfortunately, Facelets 1.x tags are unusable in Facelets 2.x (although it can easily be converted with a relative minimum of effort). All with all, it gives me somewhat the impression that Shiro is still hanging in the ancient J2EE/Spring era instead of moving forward along with the new Java EE 5/6 technologies.
Back to top
Restriction in HTTP requests
You can use the [urls] section of shiro.ini for this, as explained in Shiro web documentation. You can use the RolesAuthorizationFilter to restrict access on a per-role basis. This filter is available by the name roles which requires a commaseparated string of required roles as value. Here's an example:
[urls]
/login.xhtml = user
/app/admin/** = user, roles[ADMIN]
/app/manager/** = user, roles[MANAGER]
/app/employee/** = user, roles[EMPLOYEE]
/app/hr/** = user, roles[MANAGER,EMPLOYEE]
/app/** = user
/public/** = anon
Note that multiple roles are treated as an AND condition, so the resource /app/hr/** requires the user to have both the roles MANAGER and EMPLOYEE. Also note that there's an anon filter allowing access by anonymous users (guests, non-logged-in users).
Also note that when you intend to restrict users applicationwide by /**, that you should not forget to explicitly allow access to JSF resources (CSS/JS/image files), otherwise your login page would appear without any styles/scripts/images. You can achieve that by mapping the JSF resource URL pattern to the anon filter:
[urls]
/login.xhtml = user
/javax.faces.resource/** = anon
/** = user
If a rule is violated, then Shiro returns a HTTP 401 error, which is customizable by the following error page entry in web.xml as follows, which can be a fullworthy JSF page:
<error-page>
<error-code>401</error-code>
<location>/WEB-INF/errorpages/unauthorized.xhtml</location>
</error-page>
Everything with regard to HTTP request restriction seems to work fine. The configuraiton is quite simple, too.
Back to top
Programmatic restriction in bean methods
In JSF/CDI/EJB beans, the currently logged-in user is available by SecurityUtils.getSubject() which returns a Subject which has in turn several checkXxx(), hasXxx() and isXxx() methods to check the roles and permissions. The checkXxx() ones will throw an exception in case of a mismatch.
package com.example.controller;
import javax.enterprise.context.RequestScoped;
import javax.inject.Named;
import org.apache.shiro.SecurityUtils;
@Named
@RequestScoped
public class SomeBean {
public void doSomethingWhichIsOnlyAllowedByADMIN() {
SecurityUtils.getSubject().checkRole("ADMIN");
// ...
}
}This throws a org.apache.shiro.authz.AuthorizationException, which is customizable by the following error page entry in web.xml as follows, which can be a fullworthy JSF page:
<error-page>
<exception-type>org.apache.shiro.authz.AuthorizationException</exception-type>
<location>/WEB-INF/errorpages/unauthorized.xhtml</location>
</error-page>
Note that this exception may be wrapped in a FacesException if it's been caught by JSF and delegated to the container. In that case, you'd like to use OmniFaces FacesExceptionFilter to unwrap it, so that the container properly receives a org.apache.shiro.authz.AuthorizationException instead of a FacesException.
Back to top
Declarative restriction in bean methods
Shiro has several annotations like @RequiresRoles. Its documentation mentions that it only requires AOP like AspectJ or Spring. Well, as we're running Java EE 6, we'd like to utilize a Java EE interceptor to check the invoked CDI/EJB class/method for Shiro annotations. No need for AspectJ/Spring. Java EE 5 has already standardized it for long.
While looking around if someone else didn't already invent such an interceptor, I stumbled via list of Shiro Articles on among others this blog. The code at that blog was however not really useable as it didn't check for Shiro-specific annotations, but instead a homebrewed one. It also performed a permission check on certain method name patterns which is perhaps smart (convention over configuration), but not really declarative. There's another blog which has basically the same idea as I'm looking for, but the overall code quality is pretty poor (e.g. catching NPE...), it was clearly written by a starter. It must be doable with less than half of the provided code (and even with full coverage of annotations instead of only three).
Well, let's write it myself. First create an annotation which the interceptor has to intercept on:
package com.example.interceptor;
import java.lang.annotation.ElementType;
import java.lang.annotation.Inherited;
import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;
import java.lang.annotation.Target;
import javax.interceptor.InterceptorBinding;
@Inherited
@InterceptorBinding
@Target({ ElementType.TYPE, ElementType.METHOD })
@Retention(RetentionPolicy.RUNTIME)
public @interface ShiroSecured {
//
}Then create the interceptor itself:
package com.example.interceptor;
import java.io.Serializable;
import java.lang.annotation.Annotation;
import java.lang.reflect.Method;
import java.util.Arrays;
import javax.interceptor.AroundInvoke;
import javax.interceptor.Interceptor;
import javax.interceptor.InvocationContext;
import org.apache.shiro.SecurityUtils;
import org.apache.shiro.authz.UnauthenticatedException;
import org.apache.shiro.authz.annotation.RequiresAuthentication;
import org.apache.shiro.authz.annotation.RequiresGuest;
import org.apache.shiro.authz.annotation.RequiresPermissions;
import org.apache.shiro.authz.annotation.RequiresRoles;
import org.apache.shiro.authz.annotation.RequiresUser;
import org.apache.shiro.subject.Subject;
@Interceptor
@ShiroSecured
public class ShiroSecuredInterceptor implements Serializable {
private static final long serialVersionUID = 1L;
@AroundInvoke
public Object interceptShiroSecurity(InvocationContext context) throws Exception {
Subject subject = SecurityUtils.getSubject();
Class<?> c = context.getTarget().getClass();
Method m = context.getMethod();
if (!subject.isAuthenticated() && hasAnnotation(c, m, RequiresAuthentication.class)) {
throw new UnauthenticatedException("Authentication required");
}
if (subject.getPrincipal() != null && hasAnnotation(c, m, RequiresGuest.class)) {
throw new UnauthenticatedException("Guest required");
}
if (subject.getPrincipal() == null && hasAnnotation(c, m, RequiresUser.class)) {
throw new UnauthenticatedException("User required");
}
RequiresRoles roles = getAnnotation(c, m, RequiresRoles.class);
if (roles != null) {
subject.checkRoles(Arrays.asList(roles.value()));
}
RequiresPermissions permissions = getAnnotation(c, m, RequiresPermissions.class);
if (permissions != null) {
subject.checkPermissions(permissions.value());
}
return context.proceed();
}
private static boolean hasAnnotation(Class<?> c, Method m, Class<? extends Annotation> a) {
return m.isAnnotationPresent(a)
|| c.isAnnotationPresent(a)
|| c.getSuperclass().isAnnotationPresent(a);
}
private static <A extends Annotation> A getAnnotation(Class<?> c, Method m, Class<A> a) {
return m.isAnnotationPresent(a) ? m.getAnnotation(a)
: c.isAnnotationPresent(a) ? c.getAnnotation(a)
: c.getSuperclass().getAnnotation(a);
}
}Note: the abbreviated c, m and a variablenames are not my style, it's just to get the code to fit in 100 char max length of this blog — I have my editor set at 120 chars. Also note that the annotations are checked on the target class' superclass as well as the target class may in case of CDI actually be a proxy and Shiro's annotations don't have @Inherited set.
In order to get it to work on CDI managed beans, first register the interceptor in /WEB-INF/beans.xml as follows:
<?xml version="1.0" encoding="UTF-8"?>
<beans
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://docs.jboss.org/cdi/beans_1_0.xsd"
>
<interceptors>
<class>com.example.interceptor.ShiroSecuredInterceptor</class>
</interceptors>
</beans>Similarly, in order to get it to work on EJBs, first register the interceptor in /WEB-INF/ejb-jar.xml as follows (or in /META-INF/ejb-jar.xml if you've a separate EJB project in EAR):
<?xml version="1.0" encoding="UTF-8"?>
<ejb-jar
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
http://java.sun.com/xml/ns/javaee/ejb-jar_3_1.xsd"
version="3.1"
>
<interceptors>
<interceptor>
<interceptor-class>com.example.interceptor.ShiroSecuredInterceptor</interceptor-class>
</interceptor>
</interceptors>
<assembly-descriptor>
<interceptor-binding>
<ejb-name>*</ejb-name>
<interceptor-class>com.example.interceptor.ShiroSecuredInterceptor</interceptor-class>
</interceptor-binding>
</assembly-descriptor>
</ejb-jar>On a CDI managed bean, you need to set the custom @ShiroSecured annotation in order to get the interceptor to run.
package com.example.controller;
import javax.enterprise.context.RequestScoped;
import javax.inject.Named;
import org.apache.shiro.authz.annotation.RequiresRoles;
import com.example.interceptor.ShiroSecured;
@Named
@RequestScoped
@ShiroSecured
public class SomeBean {
@RequiresRoles("ADMIN")
public void doSomethingWhichIsOnlyAllowedByADMIN() {
// ...
}
}This is not necessary on an EJB, the ejb-jar.xml has already registered it on all EJBs.
Noted should be that this interceptor feature is in no way supported on JSF managed beans. That's exactly the reason why this article is using CDI managed beans from the beginning on. If your business requirements however allow to have those security restriction annotations on EJBs only, then you can also just keep them over there and get away with JSF managed beans.
As an alternative, if you don't want to spend some XML code for some reason, then you can also explicitly set the desired interceptor on the CDI managed bean or EJB using the @Interceptors annotation. So, instead of the custom @ShiroSecured annotation and all the XML configuration, you could also use this annotation on both CDI managed beans and EJBs:
@Interceptors(ShiroSecuredInterceptor.class)
This is however considered tight coupling and thus poor design.
In any way, reagardless of how the interceptor is registered, the annotation based restriction works really nice! In case of ajax requests, you may want to register the OmniFaces FullAjaxExceptionHandler to prevent the no-feedback problem on exceptions in ajax requests.
Back to top
Summary
No, Shiro is not ready for Java EE 6. It didn't work out the box. It lacks the following essential Java EE 6 features:
- A JSF ajax aware filter which sends a proper redirect
- A JSF2 Facelets taglib (although not strictly necessary if you only need user/role checks)
- A CDI/EJB interceptor for security annotations
Another point of concern is the state and documentation of the project. I have the impression that Shiro is somewhat hanging in the ancient J2EE/Spring era and also that documentation needs some more attention and love. Further, it would be really cool if Shiro also remembers the POST request which failed authentication, so that it can immediately be re-executed after successful login. Also, having a salt aware JDBC realm out the box of Shiro would be very useful.
Other than that, the configuration is a breeze and fully portable across containers. Also, the security API is awesome, it has quite handy cryptographic helper classes and furthermore it even supports impersonating out the box. I would forgive its current Java EE 6 shortcomings, which are fortunately relatively easy to fix, but they should really work on that soon :)
